ION Source Promotion

posted in: UHV Technology | 0

ION SOURCE PROMOTION Order the IS40E1 SET   Set includes: Ion Source IS40E1 Ion Source Power Supply IS40-PS (90 – 240 V with 7.5m cable, with communication interface RS232/485, Ethernet Main cable with Euro, UK, JP, or USA plug Learn More – Ion Source IS40E1 Learn More – Ion Source … Read More

Synthesium

posted in: Software, UHV Technology | 0

Software Synthesium Innovative software tool optimized for easy and complete control over the entire deposition process and all components in the system. It comprises a convenient and intuitive graphical user interface allowing three general modes of operation:• manual control of all system elements, • automated control by predefined recipes,• service mode, that … Read More

Spectrium

posted in: Software, UHV Technology | 0

Software Spectrium The SPECTRIUM is based on the novel developments in techniques and signal processing.The user can define the range of voltage (low and high pass) without any  manual changes from the level software. The PES and ISS mode can be set from the SPECTRIUM software. The SPECTRIUM consists of … Read More

Thermal Desorption Spectrometer

posted in: Software, UHV Technology | 0

Software Thermal Desorption Spectrometer Description: Our TDS Control Application allows precise control of Thermal Desorption Spectroscopy processes with fully integrated management of a temperature controller (Eurotherm 2408/3216 or Prevac PID Regulator) and mass spectrometer combination. It is applicable for both UHV and ambient thermal desorption applications based on choice of mass … Read More

Molecular Beam Epitaxy

posted in: Software, UHV Technology | 0

Software Molecular Beam Epitaxy Description: Prevac MBE systems are field-proven research devices for ultra-pure and precise growth of compound materials.The MBE Control Module is our dedicated, easy to use software package for long term, stable control of MBE growth processes. Our application includes: PLC control module for controlling water cooling circuit, … Read More

Titanium Sublimation Pump (TSP) Control

posted in: Software, UHV Technology | 0

Software Titanium Sublimation Pump (TSP) Control Description: Easy to use graphics interface. Full software control of current, run time per filament, off time per filament, number of active filaments (up to four) and cycle count. User defined configurations can be stored and easily recalled. Full access to all power supply parameters. Available also … Read More

Heater Power Supply Control

posted in: Software, UHV Technology | 0

Software Heater Power Supply Control Description: Easy to use graphics interface. Full software control of current and voltage. User defined configurations can be stored and easily recalled. Full access to all power supply parameters. Available also as .dll library with full documentation for configuration within e.g. LabView, LabWindows etc. Hardware Compatibility: HEAT3-PS … Read More

PCU Control

posted in: Software, UHV Technology | 0

Software PCU Control Description: Easy to use graphics interface. Full software control of a single vacuum/UHV system including pumps, valves and pressure gauge set. User defined threshold/trigger levels and system configurations can be stored and easily recalled. Full access to all power supply parameters. Available also as .dll library with full documentation for … Read More

Bakeout Control

posted in: Software, UHV Technology | 0

Software Bakeout Control Description: Easy to use graphics interface. Full software control of bakeout time and temperature. User defined configurations can be stored and easily recalled. Full access to all power supply parameters. Available also as .dll library with full documentation for configuration within e.g. LabView, LabWindows etc. Hardware Compatibility: Bakeout Control … Read More

Quartz Balance Control Application

posted in: Software, UHV Technology | 0

Software Quartz Balance Control Application Description: Easy to use graphics interface. Measurement of frequency, rate and thickness from both channels simultaneously. User defined materials list and/or manual configuration of material density and acoustic impedance. User defined endpoint thickness, tolling factors and primary sensor type. Store and recall of user defined configurations. … Read More

Multiaxes Manipulator Control Application

posted in: Software, UHV Technology | 0

Software Multiaxes Manipulator Control Application Description: The Multi-Axis Control application has been designed for simple control of up to 6 motorised manipulator axes. Compared with manual control, very high resolution and repeatability of all manipulator axes is guaranteed with specifically designed control algorithms and routines. Both relative and absolute motions are … Read More

Residual Gas Analyzer

posted in: Software, UHV Technology | 0

Software Residual Gas Analyzer Description: The RGA module allows fully functional control of the SRS range of residual gas analyzers (RGA100/200/300), including data acquisition, graphical display and data storage. The user can edit and control mass scan parameters, including mass number, range, detector type and scan speed. We also include … Read More

Electron Source Control

posted in: Software, UHV Technology | 0

Software Electron Source Control Description: ES Source Power Supply software extension for data acquisition and convenient control. Features: Full access to device settings and parameters Easy visual device status preview Real time data acquisition Real time chart presentation for acquired data Real time data saving Export acquired data to common formats for … Read More

UV Source Control

posted in: Software, UHV Technology | 0

Software UV Source Control Description: UV Source Power Supply software extension for data acquisition and convenient control. Features: Full access to device settings and parameters Easy visual device status preview Real time data acquisition Real time chart presentation for acquired data Real time data saving Export acquired data to common formats for … Read More

X-Ray Source Control

posted in: Software, UHV Technology | 0

Software X-Ray Source Control Description: X-RAY Source Power Supply software extension for data acquisition and convenient control. Features: Full access to device settings and parameters Easy visual device status preview Real time data acquisition Real time chart presentation for acquired data Real time data saving Export acquired data to common formats for … Read More

Flood Source Control

posted in: Software, UHV Technology | 0

Software Flood Source Control Description: FLOOD Source Power Supply software extension for data acquisition and convenient control. Features: Full access to device settings and parameters Easy visual device status preview Real time data acquisition Real time chart presentation for acquired data Real time data saving Export acquired data to common formats for … Read More

ION Source Control

Software ION Source Control Description: ION Source Power Supply software extension for data acquisition and convenient control. Features: Full access to device settings and parameters Easy visual device status preview Real time data acquisition Real time chart presentation for acquired data Real time data saving Export acquired data to common formats for … Read More

Chart 2D

Software Chart 2D Chart 2D module give user access to see graphic representation of data in time. User can select which data he want to see, also has possibility to configure axes. Position, name and count of axes are free to configure and not limited. Data connected to selected axis can be draw with manual … Read More

Recipe Editor

Software Recipe Editor Recipe Editor module is designed to perform technological process base on recipe. It give user possibility to create recurrent process. By using graphical interface user can create list of sequences to execute. This module can control any device that is connected to the UMS. It can also wait during the process … Read More

Vacuum Chamber Highlight VCH-10

Vacuum Chamber Highlight Vacuum Chamber Highlight VCH-10 Description The VCH-10 is the perfect accessory for illuminating sample areas, movement regions and source/accessory positions within a HV and UHV systems. It combines a very high brightness, long lifetime at very low power LED illumination source with a compact power supply that can be operated … Read More

Stepper Motor Control Device SMCD12

Measurement Controllers Stepper Motor Control Device SMCD12 The SMCD12 Stepper Motor Control Device is designed for controlling the higher power stepper motors in applications where either higher speeds and/or higher torques than can be delivered by the SMCD10 are required. The SMCD12 device is mainly recommended for precision transfer systems, … Read More

Stepper Motor Control Device SMCD10

Measurement Controllers Stepper Motor Control Device SMCD10 The SMCD10 Stepper Motor Control Device is designed for controlling the low power stepper motors in applications where high speed and high torque is not very important. The SMCD10 device is mainly recommended for precision transfer systems, e.g. manipulators, sample transfer systems etc. … Read More

Ion Multi Gauge Controller MG15

Measurement Controllers Ion Multi Gauge Controller MG15 Description The MG15 is able to support four active gauges and up to three passive gauges, extending the measurement range to 2×10-12mbar. The unit is fully software controlled. The unit can be remotely controlled via one of available interfaces. Features • Measurement range from atmospheric to 2×10-12 mbar … Read More

Thickness Monitors TM13 & TM14

Measurement Controllers Thickness Monitors TM13 & TM14 Description The TM13 and TM14 devices comprise: quartz oscillator, frequency measuring system and communication interface. It is connected to the input element of a quartz resonator. The measurement results are transmitted via RS232 to the master device: either a PC or TMC13 controller. Features TM13 Frequency Resolution: … Read More

Thickness Monitors Controller TMC-13

Measurement Controllers Thickness Monitors Controller TMC-13 Description TMC13 is the newest technology electronics designed for monitoring and controlling any coating and deposition processes. Up to six channel inputs and two additional vacuum gauge channels together with 7″ TFT display makes this unit really unique and universal. Sensor inputs can be assigned … Read More

Power Control Unit PCU16

Power Control Units Power Control Unit PCU16 Description The PCU16 Power Control Unit is a compact, standalone microprocessor device for controlling one complete UHV vacuum system. It supports one ultra-high vacuum pump (e. g. turbo molecular pump, ion pump, cryo pump, etc.), electromagnetic vent valve, electromagnetic safety valve, fore vacuum pump … Read More

Research Unit Digital Instrument RUDI-EA2

Power Supplies & Heating Controllers Research Unit Digital Instrument RUDI-EA2 RUDI-EA2 is a novel, modular high voltage power supply for photoemission and other demanding research applications. The electronics features fully calibrated, independently operating modules utilising the very latest electronics and software technology. Voltage supplies are controlled by high precision 16-bit digital-to-analog … Read More

X-Ray Source Electronics XR40B

Power Supplies & Heating Controllers X-Ray Source Electronics XR40B The XR40B-SET comprises 3 units for full control of the X-Ray Source RS40B1: XR40B-EC emission controller, XRHV01-PS high voltage power supply and XRCB-02 Cooling Box. XR40B-EC emission controller The XR40B-EC electronic unit controls the x-ray source emission current. It fully controls the high voltage x-ray … Read More

Titanium Sublimation Pump Power Supply TSP03-PS

Power Supplies & Heating Controllers Titanium Sublimation Pump Power Supply TSP03-PS Description The TSP03-PS Titanium Sublimation Pump Power Supply is configured for constant filament current operation and features a thyristor and phase-control circuit for long-term and trouble-free TSP operation. Unit can be remotely controlled via RS232/485 or Ethernet interfaces. Application The … Read More

Bakeout Control Unit BCU14

Power Supplies & Heating Controllers Bakeout Control Unit BCU14 Description The BCU14 Bakeout Control Unit is a microprocessor controlled device for independent control of either two heating zones of a vacuum system or a single heating zone and a sample heater inside e.g. a preparation chamber. Heating operation for either one sample and one chamber … Read More

Sample Heating Power Supply HEAT3-PS

Power Supplies & Heating Controllers Sample Heating Power Supply HEAT3-PS Description The HEAT3-PS is used for resistive heating or electron bombarment heating. The power supply can additionally be used for effusion cell evaporators. The unit is equipped with a PID temperature controller. Ramp power heating protects the heater from overheating the … Read More

Flood Source Power Supply FS40A-PS

Power Supplies & Heating Controllers Flood Source Power Supply FS40A-PS Description The FS40A-PS power supply allows fine adjustment of all instrument parameters for achieving a wide range of beam profiles; no additional electronics are required. All adjustable parameters are displayed on the large, high brightness LCD display. All settings can be … Read More

Electron Source Power Supply ES40-PS

Power Supplies & Heating Controllers Electron Source Power Supply ES40-PS Description The power supply allows fine adjustment of beam energy, density, position on the sample and also beam profile. Advanced scanning features allow for independently controlled scanning range and scanning speed. All settings can be stored and recalled automatically after … Read More

Electron Beam Evaporator Power Supply EBV40A-PS

Power Supplies & Heating Controllers Electron Beam Evaporator Power Supply EBV40A-PS Description A key feature of the EBV40A is the integrated flux monitor. Evaporant flux is indirectly monitored via the measured ion current, providing accurate flux adjustment and faster deposition rate control. The ion collector is contained within the beam … Read More

Titanium Sublimation Pump

posted in: Accessories, UHV Technology | 0

Titanium Sublimation Pump Used to supplement the pumping action of other UHV pumps (normally Ion pumps and turbo molecular pumps) as it can be more effective at pumping certain gases. The main advantage of this pump is that it is simple, inexpensive, and can produce high pumping speeds. The TSP … Read More

Deposition Holders

Deposition Holders Sample holders (wafers, molyblocs) dedicated for different deposition techniques, such as MBE, magnetron sputtering, thermal evaporation and others. Available in 2“, 3“, 4“ diameter size as standard (6“, 8“ and larger on request). The holder can be configured with adaptations for single and multiples of other types of … Read More

Flag Style Sample Holders

Flag Style Sample Holders Commonly used sample holder for a wide range of applications. Available as a simple bare plate or configurations including; with 4x M2 screws for sample fixing, plate with pedestal or prepared for electron bombardment, resistive or direct current heating. The holder also can be equipped with a thermocouple for … Read More

PTS 200 RES Sample Holder

PTS 200 RES Sample Holder Description The PTS 200 RES sample holder features a heated, rotating wire of 129mm L and 0.5mm dia (max) for vapor deposition experiments. The wire rotates around the longitudinal axis to ensure even deposition. The sample holder docks with a bespoke receiving station that is fully compatible with … Read More

PTS QUARTZ Sample Holder

PTS QUARTZ Sample Holder Description The PTS QUARTZ sample holder is equipped with integrated quartz balance for deposition rate measurements. A key advantage is that all evaporators may be calibrated with the same quartz crystal. Additionally, the sample holder can measure rates in multiple chambers on multi-chamber UHV systems, removing … Read More

PTS SPM 2000 EB/C-C Sample Holder

PTS SPM 2000 EB/C-C Sample Holder Description The PTS SPM 2000 EB/C-C sample holder is for SPM work and is equipped with electron beam sample heating up to 2000°C. Dedicated for Ø8mm or smaller single crystals with suitable mounting slits. Specification Designed for Scanning Probe Microscopy. Thermocouple: Type C.

PTS SPM DIR/C-K Sample Holder

PTS SPM DIR/C-K Sample Holder Description The PTS SPM DIR/C-K Sample Holder is for SPM work and is equipped with direct sample heating and cooling over the range -170°C to 1200°C. Specification Designed for Scanning Probe Microscopy. Temperature Range: -170°C to 1200°C Thermocouple To match exact configuration – all types possible. Additional … Read More

PTS 1200 RHK EB/C-K Sample Holder

PTS 1200 RHK EB/C-K Sample Holder Description The PTS 1200 RHK EB/C-K sample holder has indirect sample heating up to 1200°C and cooling down to –170°C. It is designed for SPM measurements. It is compatible with the standard PTS receiving stations. Application SPM measurements Specification Temperature Range: up to 1200°C – with EB … Read More

PTS SPM CLEAV sample holder

PTS SPM CLEAV sample holder Description The PTS SPM Cleav sample holder combines sample cleaving capabilities with SPM compatibility over the temperature range -170°C to 600°C (indirectly heated). Specification Designed for Scanning Probe Microscopy.Temperature Range: -170°C to 600°CIntegrated Cleaver Mechanism. Thermocouple: To match exact configuration – all types possible. Additional … Read More

1 2 3