Vacuum Exsiccator (Desiccator) with 3 slots

Product code: EXSICA3S

Compact and rigid, fully transparent vacuum desiccator cabinet to store samples under vacuum or in a controlled atmosphere. The desiccator is equipped with two see-through removable shelves, offering a clear view and the possibility of placing compartment boxes neatly ordered. After pump down using a membrane pump, the exsiccator holds a base pressure of approximately 25mbar for a period of several months. A pressure meter roughly indicates the vacuum level. The box can be filled with dry Nitrogen or Argon if desired. An overpressure valve is provided for safety reasons. Two right angle valves with 6mm tube connections are provided for pumping and venting.

Specifications: Vacuum Exsiccator (Desiccator) with 3 slots

  • Material: PMMA GS transparent
  • Wall Thickness: 24mm
  • Shelves: 2 pieces, removable
  • Pump and Vent connection: 1 Straight Valve with Quick Connector for Metric 6mm Serto Tube Fitting
  • Security Valve: Opens at 200mbar Overpressure
  • Pressure Gauge: -1 to +0.6 bar
  • Door: O-Ring seal, 1 clip catch
  • Weight: 19kg
  • Outline Dimensions, incl. valves, hinges etc: (W x H x D)= 498 x 294 x 302mm
  • Inside Dimensions: (W x H x D)= 400 x 275 x 302mm
Vacuum Exsiccator (Desiccator) with 3 slots
EXSICA3P

Portable Vacuum Exsiccator

Product code: EXSICA3P

 

The portable version of our vacuum exsiccator is compact, lightweighted and easy to carry around. Transparency of the polished PMMA as well as the storage box sets ensures a clear view and easy organization of your samples.

After pumpdown with a membrane pump, the exsiccator holds a base pressure of approximately 25mbar for a period of several months. A pressure meter roughly indicates the vacuum level. The box can be filled with inert gas if desired. An overpressure valve is provided for safety reasons. A valve with 6mm tube quick connectors is provided for pumpdown and venting.

Ideal in combination with the PUM005 Roughing pump 5l/min (0.3 m3/h) which can be mounted directly under the EXSICA3P with quick couplings for ease of use and handling (sketch right).

 

Specifications: Portable Vacuum Exsiccator

 

EXSICA3P

  • Material: PMMA GS Transparent
  • Wall thickness: 15mm
  • Shelves: 2 pieces, Removable
  • Pump and Vent connection: 1 Straight Valve with Quick Connector for Metric 6mm Serto Tube Fitting
  • Security Valve: Opens at 200mbar Overpressure
  • Pressure Gauge: -1 to +0.6 Bar
  • Door: O-Ring Seal, 1 Clip Catch
  • Weight: 3.9kg
  • Outline Dimensions, incl. Valves, Hinges etc: (W x H x D)= 265 x 206 x 212mm
  • Inside Dimensions: (W x H x D)= 200 x 120 x 105mm
  • Including 3 Storage Containers with 18 Compartments
YAG crystals
EXSICA3P

Vacuum Exsiccator (Desiccator), extrawide, 2 slots

Product code: EXSICA2W

Compact and rigid vacuum exsiccator cabinet to store samples under vacuum or in a controlled atmosphere. The desiccator is equipped with one transparent removable shelve, offering a clear view and the possibility of placing boxes neatly ordered. After pumpdown using a membrane pump for instance, the exsiccator holds a base pressure of approximately 25mbar for a period of several months. A pressure meter indicates the vacuum level. The box can be filled with dry Nitrogen or Argon if desired. An overpressure valve is provided for safety reasons. Two right angle valves with 6mm tube connections are provided for pumping and venting.

Specifications: Vacuum Exsiccator (Desiccator), extrawide, 2 slots

  • Material: PMMA GS Transparent
  • Wall Thickness: 35mm
  • Shelves: 1 Piece, Removable
  • Pump and Vent Connections: 2 Angle Valves with Metric 6mm Serto Tube Fittings
  • Security Valve: Opens at 200mbar Overpressure
  • Pressure Gauge: -1 to +0.6 bar
  • Door: O-Ring seal, 2 Clip Catch
  • Weight: 28kg
  • Outline Dimensions, incl. Valves, Hinges etc: (W x H x D)= 683 x 322 x 337mm
  • Outline Dimensions, Box Only: (W x H x D)= 585 x 295 x 337mm
  • Inside Dimensions: (W x H x D)= 495 x 225 x 260mm
EXSICA2W

Intelligent LED Chamber Ring Light on Adapter for DN40CF

Product code: ADLED40

 

The ADLED40 chamber light with it's 16 individually controllable RGB LEDs is designed for tailored illumination inside UHV chambers. Furthermore it facilitates viewing through the very viewport it is attached to.

Offering high brightness, a no noise, non-flickering operation and low energy consumption it also allows for the full spectrum of (RGB) colours to be set at your convenience for specifically targeted lighting of your chamber.

Fixed to an adapter for DN40CF, it's LEDs guarantee extended operational life, reducing the need for costly replacement of lamps, often associated with other types of lighting. Power the whole ring with 5VDC (4-7V works) and you're ready.

There is a single data line with a very timing-specific protocol. This means it requires a real-time micro-controller such as an AVR, Arduino, PIC, mbed, etc. It cannot be used with a Linux-based microcomputer or interpreted micro-controller such as the Netduino or Basic Stamp. A controller from Ferrovac will be available soon.

Specifications: Intelligent LED Chamber Ring Light on Adapter for DN40CF

  • LED Count: 16 LEDs
  • LEDs Individually Controllable, all (RGB) Colors Configurable
  • Quick On/Off - almost immediate operation
  • Peak power use: approx. 5 Watts
  • Luminous Intensity:
    • Red = 550-700mcd/LED
    • Green =110-1400mcd/
    • LEDBlue = 200-400mcd/LED
  • Working Voltage: 5VDC
  • Controllable with Single Data Line with a Very Timing-Specific Protocol
  • Hertz: approx. 400KHz
  • Controller Not Included
ADLED40

Roughing pump 5l/min (0.3 m3/h)

Product code: PUM005

A mini membrane pump with 5l/min pump capacity. Ideal in combination with the EXSICA3P Portable Vacuum Exsiccator (sketch right) or as a prevacuum pump for small vacuum systems.

The pump is fixed inside a box (100mm height) which can be mounted directly under the EXSICA3P with quick couplings for ease of use and handling. The pump operates with mains voltage 12 V DC.

Specifications: Roughing pump 5l/min (0.3 m3/h)

  • Does Not Start Against Vacuum Nor Overpressure
  • Working Temperature: +5°C...+40°C
  • Maintenance-free
  • Cool Running Motor Even when in Constant Use
  • Oil-free Operation
  • Recommended for our EXSICA3P Desiccator
  • The Pump is Mounted in a Box (100mm height) which can be Mounted Directly Under the EXSICA3P
PUM005
PUM005 curve

Roughing pump 13l/min (0.78 m3/h)

Product code: PUM013

A membrane pump with 13l/min pump capacity. Ideal in combination with the EXSICA3P or the EXSICA3S or as a roughing pump for small vacuum systems.

Specifications: Roughing pump 13l/min (0.78 m3/h)

  • Starts against vacuum
  • Working temperature: +5°C...+40°C
  • Maintenance-free
  • Cool running motor even when in constant use
  • Oil-free operation
  • Recommended for our desiccators EXSICA3P and EXSICA3S
PUM013
PUM013 curve

Membrane vacuum pump 60l/min (3.6 m3/h) KNF

Product code: PUM060 A membrane pump with 60l/min pump capacity. Ideal in combination with the EXSICA3S or the EXSICA2W or as a roughing pump for vacuum systems.

Specifications: Membrane vacuum pump 60l/min (3.6 m3/h) KNF

  • Starts against vacuum
  • Working temperature: +5°C...+40°C
  • Maintenance-free
  • Cool running motor even when in constant use
  • Oil-free operation
  • Recommended for our desiccators EXSICA3S and EXSICA2W
  • Base pressure 2mbar
PUM060 curve
PUM060

Storage Box suitable for EXSICA3S

Product code: SBEXSICA

Specifications: Storage Box suitable for EXSICA3S

Storage box for the EXSICA3S. The box is made of Polystyrene(PS).
Outline dimensions: (W x H x D)= 330 x 50 x 220mm
Subdivision: 6

  • 1 piece 215 x 108 x 45mm (W x D x H)

  • 2 piece 162 x 108 x 45mm (W x D x H)

  • 1 piece 108 x 54 x 45mm (W x D x H)

  • 2 piece 54 x 54 x 45mm (W x D x H)

Storage Box suitable for EXSICA3S