Bearings for MD40 Linear/Rotary Feedthroughs

Product Code: SERFMD40

The slide-bearings are the only parts of the linear/rotary feedthrough, that wear out. It is important to check the smoothness of the motion from time to time and please make sure, you don't hear any scratching noise or feel unusual friction while using the MD40. Worn out bearings can be responsible for extensive outgassing effects during motion. If any of the above occurs, replace the bearings.

  • Factory overhaul
  • Fully UHV compatible materials
  • Cleaned to UHV standards
  • Max bakeout temperature 150° C
  • Assembly time

Bearings for MD40 Linear/Rotary Feedthroughs

Product Code: SERKMD40

The slide-bearings are the only parts of the linear/rotary feedthrough, that wear out. It is important to check the smoothness of the motion from time to time and please make sure, you don't hear any scratching noise or feel unusual friction while using the MD40. Worn out bearings can be responsible for extensive outgassing effects during motion. If any of the above occurs, replace the bearings.

  • Fully UHV compatible materials
  • Cleaned to UHV standards
  • Max bakeout temperature 150° C

Tube Support for MD16(TS) and MD40

Product Code: TSMD-XXXX

Tube Support for MD16(TS) and MD40.

Two parallel 8mm diameter shafts are protecting the tube unit against accidental bending.

  • Fixedly installed
  • Two parallel 8mm diameter shafts

Tube Support for MD16(TS) and MD40 single sided

Product Code: TSMDH-XXXX

Tube Support for MD16(TS) and MD40.

Single sided tube support for MD16(TS) and MD40.
One 8mm diameter shaft protects the tube unit from accidental bending.

  • Fixedly installed
  • One 8mm diameter shaft

 

Motorized Linear Drive for MD40 Feedthrough

Product Code: DRVMDMOTL-XXXX

Stepper motor-driven one axis linear actuator. It's high precision motorized spindle drive is coupled to the outer magnet and controls linear motion. With a 2mm pitched spindle, a resolution of 0.01mm is possible. Alternatively, a 1mm pitched spindle provides even higher resolution. The linear axis is driven by a Nanotec ST2018L0804 2-phase stepper motor.The sturdy linear unit ensures unchanging alignment of all components and consistent positioning.

Motorized Drive for MD16 Feedthrough

Product Code: DRVMDMOTL16-XXXX

Stepper motor-driven one axis linear actuator. It's high precision motorized spindle drive is coupled to the outer magnet and controls linear motion. With a 2mm pitched spindle, a resolution of 0.01mm is possible. Alternatively, a 1mm pitched spindle provides even higher resolution. The linear axis is driven by a Nanotec ST2018L0804 2-phase stepper motor.

The sturdy linear unit ensures unchanging alignment of all components and consistent positioning.

Motorized Linear and Rotary Drive for MD40 Feedthrough

Product Code: DRVMDMOTLR-XXXX

Stepper motor-driven linear and rotary actuator. It's high precision motorized spindle drive is coupled to the outer magnet and controls linear motion. With a 2mm pitched spindle, minimal steps of 0.01mm are possible. Alternatively, a 1mm pitched spindle provides even higher resolution.

Rotation of the shaft is activated via gear wheels that transfer motion from a second stepper motor.The sturdy linear unit ensures unchanging alignment of all components and consistent positioning.

Motorized Linear and Rotary Drive for MD16 Feedthrough

Product Code: DRVMDMOTLR16-XXXX

Stepper motor-driven linear and rotary actuator. It's high precision motorized spindle drive is coupled to the outer magnet and controls linear motion. With a 2mm pitched spindle, a resolution of 0.01mm is possible. Alternatively, a 1mm pitched spindle provides even higher resolution.

Rotation of the shaft is activated via gear wheels that transfer motion from a second stepper motor.The sturdy linear unit ensures unchanging alignment of all components and consistent positioning.

Motorized Linear/Manual Rotary Manipulator DN40CF

Product Code: MD40-XXXX-YYYY

Product Code: DRVMDMOTL-XXXX-YYYY

Linear/rotary feedthrough, equipped with a motorized one axis linear actuator. It's Nanotec ST2018L0804 2-phase stepper motor-driven high precision spindle drive is coupled to the outer magnet and controls linear motion. With a 2mm pitched spindle, a readout of 0.05mm is possible. Alternatively, a 1mm pitched spindle provides even higher resolution.

The sturdy linear unit ensures unchanging alignment of all components and consistent positioning.