Vacuum Coating System
Elevate your research and production processes with our state-of-the-art Desktop Coater, an essential component of our precision vacuum coating system.
Designed for versatility and performance, our desktop coater offers an array of features to meet your coating needs.
Desktop Sputter Coater-DSR1
SEM Coaters | Sputter Coaters
SEM/TEM sample prep Princeton Scientific
The Princeton Scientific Desktop Sputter Coater enables thin film sputter coating of noble metals: gold (Au), palladium (Pd), platinum (Pt) and gold/palladium (Au/Pd) on non-conductive or poorly conductive samples or devices.
DCR-Desktop Carbon Coater
Desktop Coater System
SEM/TEM sample prep Princeton Scientific
Desk Carbon Coating System compact carbon fibre coating system suitable for sample preparation for the use in scanning electron microscope (SEM), Transmission electron microscope (TEM) and X-Ray analysis (EDX).
DSCT-Turbo Pumped Sputter and Carbon Coater
Desktop Sputter System
Princeton Scientific Vacuum Coating Systems
Princeton Scientific DSCT has been developed to exceed the requirements for SEM/TEM sample preparation. The compact and easy to use sputter coater, with onboard Turbomolecular Pumping. Use supplied backing vacuum pump or your own, all controlled with the processor controller.
Turbo-Pumped Sputter Coater DST1-170
SEM Coaters | Sputter Coaters
SEM/TEM sample prep Princeton Scientific
Presenting the DST1-170, a cutting-edge high-vacuum magnetron desk sputter coater. This compact coating system stands out for its versatility, capable of coating both oxidizing and non-oxidizing metals efficiently. Ideal for short-term deposition needs, the DST1-170 excels at swiftly producing uniform thin films with fine-grained textures. Experience rapid yet precise coating cycles with this innovative solution.
DCT-Desktop Carbon Coater
Desktop SEM/TEM System
SEM/TEM sample prep Princeton Scientific
This high vacuum SEM coater offers high quality uniform films with fine grain sizes which are suitable for specimens that require high resolution and high quality characterization such as FE-SEM, EDS/WDS, TEM, and EBSD. The DSCT with a 2” magnetron cathode, 80 W switching DC power supply and high current power supply for carbon evaporation, could be used for research and different thin film applications.
DTE-Desktop Thermal Evaporation
Desktop Coater System
SEM/TEM sample prep Princeton Scientific
DTE is a Desktop Thermal Evaporator system to deposit thin layers of materials on the substrate for research purposes and investigation by electron microscopy. DTE is configured as a material evaporator suitable for sample evaporant experiments. This low-budget, small chamber, and high-vacuum system is ideal for short time deposition of noble and oxidizing metals.
DSCR-Desktop Sputter and Carbon Coater
Desktop SEM/TEM System
SEM/TEM sample prep Princeton Scientific
Princeton Scientific DSCR has been developed to exceed the requirements for SEM/TEM sample preparation. The compact and easy to use sputter coater, has the option of using existing pumps or supplied with a pump.
DTT-Turbo Triple Thermal Evaporation
SEM/TEM Coater System
Princeton Scientific Vacuum Coating Systems
The Princeton Scientific triple thermal source desktop coater provides a very versatile thermal evaporation system for a vast range of source materials in various forms from wire, cord, pellets and powders, compatible with Boat/basket and coil source holders. The control system allows up to 300 historical processed to be recorded.
DST1-300 Turbo-Pumped Sputter Coater
Desktop Sputter System
Princeton Scientific Vacuum Coating Systems
With one of the smallest benchtop footprints, DST1-300 provide DC and RF sputtering for high resolution SEM and TEM sample preparation. The DST1-300 range provides the following versions to satisfy most laboratory applications.
PLD-T Pulsed Laser
Deposition and Thermal Evaporator
SEM/TEM sample prep Princeton Scientific
Versatile Pulsed Laser Deposition and Thermal Evaporator System – PLD-T is a high vacuum thin film deposition system enables to deposit different materials by both Pulsed Laser Deposition and so Thermal Evaporation technique. It can deposit complex materials and crystalline structures onto substrates with very little setup involved. Pulsed Laser Deposition technique leads to efficient, none-thermal ablation and preserves the stoichiometry of the target materials. By applying this method it could deposit materials such as nitrides, oxides, super lattices, polymers, and composites.
DTT-GB Glovebox Triple Thermal Evaporation
Desktop Sputter System
Princeton Scientific Vacuum Coating Systems
The Princeton Scientific glovebox triple thermal source desktop coater provides a very versatile thermal evaporation system for a vast range of source materials in various forms from wire, cord, pellets and powders, compatible with Boat/basket and coil source holders. Glovebox compatible, remote control, Motorised chamber lift mechanism. Double magnetron target desk sputter coater can easily switch between evaporation and sputtering deposition for the preparation of multilayer coatings.
DST2-TGB Glovebox Sputter and Thermal Evaporation
Desktop Sputter System
Princeton Scientific Vacuum Coating Systems
The DST2-TG, Double-target Turbo Pumped Sputter Coater with Thermal evaporator for Glove box use, is a multi-vacuum coater system that combines thermal evaporator and sputter coater in one single compact desktop system with remote system control through a Wi-Fi connection, controllable by both touch screen and PC. The high vacuum system is suitable for the deposition of a wide range of materials. Double magnetron target desk sputter coater can easily switch between evaporation and sputtering deposition for the preparation of multilayer coatings.
